The VERSATEX engineering team completes on-going research of products that work well with our cellular PVC and we make a number of recommendations in our Product Suggestion Guide in order to help you install VERSATEX correctly. In addition to those suggestions, the following products are available through our stocking dealers.
A hidden fastener clip for 3/4" WP4 profiles, the VZClip is quicker and easier than traditional face nailing. Compatible with VERSATEX's reversable WP4/Nickel Gap profile and the Canvas Series WP4 profile, the VZClip is to be installed every 16 inches using #8 1 5/8inch galvanized or stainless steel screws. Coverage area is approx. 180 sq ft. or approx. 22, 18' boards.
|VZClips sold in boxes of approx. 315|
We complete the project with Weld-On. All products maintain top UV resistance and are a close match to the color of our products. Approximate set times for Weld-On #705 is 3-5 minutes.
|Weld-On #705 White||16oz||32oz|
|Weld-On #705 Clear||4oz||8oz|
|Weld-On||5oz Squeeze Tube (white only)|
For certain types of joints such as edge-to-edge, miter, "T" joints, and corners, there is hardly a better choice than a biscuit joint. VERSATEX introduced a #20 biscuit specifically made for VERSATEX trim, eliminating the use of incompatible wood biscuits.
|#20 sold in boxes of 25; Cases include ten boxes|